Product Details
Clearwater PH Plus for Swimming Pool and Spa Treatment. Bestway Clearwater 1 kg pH Plus allows you to adjust your pools alkalinity with ease. Avoid the itchy eyes and irritated skin that are caused by a drop in the levels of pool acidity. The recommended pH balance of pool water is between 7.2 and 7.6 (you can test pH levels using Clearwater Dip Test Strips, which are available on the Bestway Chemicals section of the website). When pH levels drop below 7.2 acidity increases and pH treatment needs to be applied.
Pool alkalinity can be altered by any number of factors: Leaves, insects, personal cosmetics. With the effects that too much or too little can have – the Bestway Clearwater 1 kg ph Plus is a should have chemical for any home pool set up.
As with all chemical products, instructions and warnings should be followed and heeded very carefully.
Not suitable for children under 36 months
Causes serious eye irritation
How to Use:
- Measure pH Level: Before adding any chemicals, use Clearwater Dip Test Strips to measure the pH level of your pool water. Ensure the pH is below 7.2, indicating increased acidity.
- Prepare the Product: Open the Clearwater PH Increaser container carefully, ensuring it's free from any contaminants.
- Determine Dosage: Refer to the product label for the recommended dosage based on your pool's size and current pH level. For accurate dosing, use a measuring scoop or scale.
- Add to Water: With the filtration system running, sprinkle the calculated amount of PH Increaser evenly over the water surface. Avoid pouring directly into the skimmer or near pool fixtures.
- Allow Dissolving: Let the PH Increaser dissolve completely. This may take some time depending on the size of your pool and the circulation rate.
- Recheck pH: After allowing the product to disperse, retest the pH level using the Clearwater Dip Test Strips. Adjust further if necessary.
Where to Use: Clearwater PH Increaser is designed for use in swimming pools and spas to raise the alkalinity levels and maintain the pH balance within the recommended range of 7.2 to 7.6.
When to Apply: Apply Clearwater PH Increaser when the pH level of your pool water drops below 7.2, indicating increased acidity. Factors such as leaves, insects, and personal cosmetics can influence alkalinity levels. Regularly monitor pH levels and apply the PH Increaser as needed to maintain the proper balance.
Cautions:
- Follow Instructions: Always follow the instructions provided on the product label carefully.
- Keep Away from Children: Keep the PH Increaser out of reach of children and pets. It is not suitable for children under 36 months.
- Eye Irritation: Avoid contact with eyes and skin. If contact occurs, rinse thoroughly with water and seek medical advice if irritation persists.
- Proper Storage: Store the product in a cool, dry place away from direct sunlight and moisture.
- Chemical Handling: Handle the PH Increaser with care to prevent spills or inhalation of dust. Wear protective gloves and goggles when handling the product.
- Compatibility: Ensure compatibility with other pool chemicals. Do not mix different chemicals unless specified by the manufacturer.
By following these guidelines, you can effectively use Clearwater PH Increaser to maintain the optimal pH balance in your pool, ensuring a comfortable and safe swimming environment for you and your family.